제품에 사용자가 원하는 조건에 맞는 일정량의 규칙적인 진동을 인가함으로서 진동에 대한 신뢰성을 검증할 수 있으며 또한 진동에 대한 내구성을 검증
현장에서 발생하는 모든 조건의 진폭과 진동수를 설정하여 설정값에 따라서 진동을 발생시키며 상품의 불량을 사전에 판별
뿌리장비 예약
장비 상세정보
| 장비사진 | 장비명 | 초가속스트레스스크리닝시스템(High Accelerated Stress Screeing System) | ||
|---|---|---|---|---|
|
제작사 | Shinken Co.,ltd. | 모델명 | G-0160N |
| NTIS | NFEC-2014-07-190307 | E-TUBE | 1404-Z-0009 | |
| 장비분류 | 분석장비 | 기술분야 | 용접 | |
| 보유센터 | 시흥뿌리기술지원센터 | 장비상태 | 정상 | |
| 구축일 | 2014-04-16 | 구축비용 | 91,577,499원 | |
| 수수료 | 19,000원/hr | 바우처 사용 | 사용가능 | |
| 담당자 | 이소정 | 연락처 | ||
| 매뉴얼 |
|
|||
주요사항
원리 및 특징
플립칩 접합 부품을 매우 높은 가속 진동을 주어 취약 부분에 failure를 일으켜서, 이를 토대로 신뢰성의 근거를 확보함
사용예
미세피치 플립칩 설계, 공정 변수 최적화에 필요한 접합 데이터를 제공
활용분야
(1) Shaker (higher or better than following specifications)
1) Rated peak force(kN) :
- Sine : More than 6.0KN (peak)
- Random : More than 4.2KN (RMS)
- Shock : More than 9.0KN (peak)
2) Frequency Range(Hz) : 3Hz to 2,500 Hz or more
3) Max. Rated Travel(mm) : 51 mm (Peak to Peak)
4) Max. Velocity(m/s) : More than 2.0 m/s
5) Max. Acceleration(g) : More than 92 g peak, bare table
6) Max. Payload Weight tested(kg) : 100 Kg or more
7) Cooling type : Air Cooling with blower silencer
8) Direction : Vertical operation
9) Vibration Isolation : Pneumatic Isolators resonance below 5Hz
10) Armature Guide : Air bearing
11) Armature Suspension : Bellows-less air suspension
2. Power Amplifier (higher or better than following specifications)
1) Amplifier module efficiency - higher than 90 %
2) Direct-coupled (DC-coupled) to shaker, no matching transformer
3) Input voltage more than 3Vrms (5Vpeak)
4) Switching Amplifier using updated IGBT components
5) Signal to noise ratio - better than 90 dB
6) Interlock
- Output over voltage
- Armature over current
- Amplifier over temperature
- Vibrator over travel
- Vibrator over temperature
- External stop signal
- Power module failure
- Field current failure
- Cooling blower failure
7) Operating temperature range : 5 ℃ ~ 35 ℃
8) Emergency stop switch in amplifier
9) Electrical power : 220VAC or 380VAC / 3 Ph 60hz
3. Vibration Controller
1) Channel : more than 4 channel expandable up to 16ch
2) Operation method : PC Base Control & OS Win 7 or 8
using updated DSP
3) Operating temperature range : 5 ℃ ~ 35 ℃
4) Control H/W
- All necessary units including PC, DSP, TFT and HDD should be stored in a 19” chassis
to be mounted in the same console of the power amplifier.
- Selectable analog input signal mode from voltage, charge, and ICP
- 24 bit A/D, D/A and -160dB/oct filter
5) Control S/W
- SINE / RANDOM / Shock test program
- Continuous loop check for safety & protection
- Set up for frequency range and frequency resolution
- Charge, ICP or Voltage input channel can be configured for control or measurement or disable
- Control: Average, maximum, minimum, User selectable
- Mode of operation: Manual, Automatic
- Dynamic range : Above 90dB
- User may adjust control parameters (amplitude) during operation
- Alarm/Abort limits: User definable
- Scheduling: Level and Test scheduling
- Data saved during and at the end of a test can be post processed and plotted at
any time
- Data Import/Export : ASCII, UFF, etc.
1) Rated peak force(kN) :
- Sine : More than 6.0KN (peak)
- Random : More than 4.2KN (RMS)
- Shock : More than 9.0KN (peak)
2) Frequency Range(Hz) : 3Hz to 2,500 Hz or more
3) Max. Rated Travel(mm) : 51 mm (Peak to Peak)
4) Max. Velocity(m/s) : More than 2.0 m/s
5) Max. Acceleration(g) : More than 92 g peak, bare table
6) Max. Payload Weight tested(kg) : 100 Kg or more
7) Cooling type : Air Cooling with blower silencer
8) Direction : Vertical operation
9) Vibration Isolation : Pneumatic Isolators resonance below 5Hz
10) Armature Guide : Air bearing
11) Armature Suspension : Bellows-less air suspension
2. Power Amplifier (higher or better than following specifications)
1) Amplifier module efficiency - higher than 90 %
2) Direct-coupled (DC-coupled) to shaker, no matching transformer
3) Input voltage more than 3Vrms (5Vpeak)
4) Switching Amplifier using updated IGBT components
5) Signal to noise ratio - better than 90 dB
6) Interlock
- Output over voltage
- Armature over current
- Amplifier over temperature
- Vibrator over travel
- Vibrator over temperature
- External stop signal
- Power module failure
- Field current failure
- Cooling blower failure
7) Operating temperature range : 5 ℃ ~ 35 ℃
8) Emergency stop switch in amplifier
9) Electrical power : 220VAC or 380VAC / 3 Ph 60hz
3. Vibration Controller
1) Channel : more than 4 channel expandable up to 16ch
2) Operation method : PC Base Control & OS Win 7 or 8
using updated DSP
3) Operating temperature range : 5 ℃ ~ 35 ℃
4) Control H/W
- All necessary units including PC, DSP, TFT and HDD should be stored in a 19” chassis
to be mounted in the same console of the power amplifier.
- Selectable analog input signal mode from voltage, charge, and ICP
- 24 bit A/D, D/A and -160dB/oct filter
5) Control S/W
- SINE / RANDOM / Shock test program
- Continuous loop check for safety & protection
- Set up for frequency range and frequency resolution
- Charge, ICP or Voltage input channel can be configured for control or measurement or disable
- Control: Average, maximum, minimum, User selectable
- Mode of operation: Manual, Automatic
- Dynamic range : Above 90dB
- User may adjust control parameters (amplitude) during operation
- Alarm/Abort limits: User definable
- Scheduling: Level and Test scheduling
- Data saved during and at the end of a test can be post processed and plotted at
any time
- Data Import/Export : ASCII, UFF, etc.